Rebellious Arms Automag/Minimag Compatible Pump Kit
Here they are. The infamous RA Automag Pump Kits. 316 Stainless Guide Rod, 304 Stainless Return Spring and Anti-Rotation screw. Smalley Wave Spring. ABS Printed Pump Handle. O1 Steel Pump Rod. These take a 1/4-20 screw through the VASA hole (not provided). If you don’t have a VASA hole in your AM/MM rail, you should drill one. Also, you need a pump slot in your rail. So, buy a rail with a pump slot, or have someone machine your rail. I don’t machine rails; I only make pump kits. Pump kits don’t work without pump slots. Also, all slots are not equal, so the O1 pump rod may need to be tuned/bent to work in your exact setup. I will instruct you on how this can be done.
This is the best pump kit you can get for the money right now. Well, it may be the only pump kit, but for whatever reason, buy it. I make these in waves of 10, so if they sell out, check back often.
Here they are. The infamous RA Automag Pump Kits. 316 Stainless Guide Rod, 304 Stainless Return Spring and Anti-Rotation screw. Smalley Wave Spring. ABS Printed Pump Handle. O1 Steel Pump Rod. These take a 1/4-20 screw through the VASA hole (not provided). If you don’t have a VASA hole in your AM/MM rail, you should drill one. Also, you need a pump slot in your rail. So, buy a rail with a pump slot, or have someone machine your rail. I don’t machine rails; I only make pump kits. Pump kits don’t work without pump slots. Also, all slots are not equal, so the O1 pump rod may need to be tuned/bent to work in your exact setup. I will instruct you on how this can be done.
This is the best pump kit you can get for the money right now. Well, it may be the only pump kit, but for whatever reason, buy it. I make these in waves of 10, so if they sell out, check back often.
Here they are. The infamous RA Automag Pump Kits. 316 Stainless Guide Rod, 304 Stainless Return Spring and Anti-Rotation screw. Smalley Wave Spring. ABS Printed Pump Handle. O1 Steel Pump Rod. These take a 1/4-20 screw through the VASA hole (not provided). If you don’t have a VASA hole in your AM/MM rail, you should drill one. Also, you need a pump slot in your rail. So, buy a rail with a pump slot, or have someone machine your rail. I don’t machine rails; I only make pump kits. Pump kits don’t work without pump slots. Also, all slots are not equal, so the O1 pump rod may need to be tuned/bent to work in your exact setup. I will instruct you on how this can be done.
This is the best pump kit you can get for the money right now. Well, it may be the only pump kit, but for whatever reason, buy it. I make these in waves of 10, so if they sell out, check back often.